THCV217_rev.1.00_e_brief copyright?2012 thine electronics, inc. thine electronics, inc. 1/2 THCV217 v-by-one? hs high-speed video data transmitter general description THCV217 is designed to support video data transmission between th e host and display. one high-speed lane can carry up to 32bit data and 3 bits of synchronizing signals at a pixel clock frequency from 20mhz to 85mhz. this chip, which has two high-speed data lanes, can transmit video data up to 1080p/10b/60hz. the maximum serial data rate is 3.4gbps/lane. width link cmos io frequency 24bit and 32bit si/so 20mhz to 85mhz di/do si/do 40mhz to 170mhz features ? color depth selectable: 24(8*3)/32(10*3)bit ? single-in/single-out, single-in/dual-out, and dual-in/dual-out selectable. ? ac coupling for high-speed lines ? core 1.8v, cmos io 3.3v ? package: tfbga105 ? wide frequency range ? cdr requires no extern al frequency reference ? 3.3v logic compatible input interface. si/so: single-in/single-out, di/so: dual-in/single-out, si/do: single-in/dual-out block diagram cmos input formatter serializer htpdn lockn pll pdn col demux tx0p tx0n control signal inputs. hot plug and lock detect input. tx1p tx1n high-speed cml signal output. serializer pre bet controls r1[9:0] g1[9:0] b1[9:0] cont1[1:0] hsync vsync de clkin pixel data inputs. r2[9:0] g2[9:0] b2[9:0] cont2[1:0] mode r/f
THCV217_rev.1.00_e_brief copyright?2012 thine electronics, inc. thine electronics, inc. 2/2 example system diagram htpdn lockn rx0p rx0n thcv218 3.3v rx1p rx1n r1[9:0] g1[9:0] b1[9:0] hsync vsync de clkout r2[9:0] g2[9:0] b2[9:0] tx0p tx0n THCV217 htpdn lockn tx1p tx1n r1[9:0] g1[9:0] b1[9:0] hsync vsync de clkin r2[9:0] g2[9:0] b2[9:0] example for cmos/ttl to cmos/ttl tx0p tx0n THCV217 htpdn lockn 3.3v tx1p tx1n r1[9:0] g1[9:0] b1[9:0] hsync vsync de clkin r2[9:0] g2[9:0] b2[9:0] htpdn lockn rx0p rx0n thcv216 rx1p rx1n rla0+/- rlb0+/- rlc0+/- rle0+/- rlclk0+/- rld0+/- rla1+/- rlb1+/- rlc1+/- rlclk1+/- rld1+/- rle1+/- 1.8v example for cmos/ttl to lvds notices and requests 1. the product specifications described in this material are subject to change without prior notice. 2. the circuit diagrams described in this material are examples of the application which may not always apply to the customer?s design. we are not responsible for possible errors and omissions in this material. please note if errors or omissions should be found in this material, we may not be able to correct them immediately. 3. this material contains our copy right, know-how or ot her proprietary. copying or disclosing to third parties the contents of this material without our prior permission is prohibited. 4. note that if infringement of any third party's industrial ownership should occur by using this product, we will be exempted from the responsibility unless it directly relates to the production process or functions of the product. 5. this product is presumed to be used for general elec tric equipment, not for the applications which require very high reliability (including medical equipment directly concerning people's life, aerospace equipment, or nuclear control equipment). also, when using this product for the equipment concerned with the control and safety of the transportation means, the traffic signal equipment, or various types of safety equipment, please do it after applying appropriat e measures to the product. 6. despite our utmost efforts to improve the quality and reliability of the product, faults will occur with a certain small probability, which is inevitable to a semi -conductor product. therefor e, you are encouraged to have sufficiently redundant or error preventive design applied to the use of the product so as not to have our product cause any social or public damage. 7. please note that this product is not designed to be radiation-proof. 8. customers are asked, if required, to judge by themselves if this product falls under the category of strategic goods under the foreign exchange and foreign trade control law. thine electronics, inc. sales@thine.co.jp
|
